Reset Samsung Dryer Thermal Fuse

Samsung thermal fuses cannot be reset. The fuses are typically located in the heating element area.

Whirlpool Dryer Not Running Repair Guide

Unplug your dryer and check the fuses to see if one of them is blown.

Reset samsung dryer thermal fuse. If there are no problems with the motor switches or electrical system this should restart the dryer. This video provides step by step instructions for replacing the blower thermal limit fuse on samsung dryers. Unplug the dryer to disconnect electrical power.

Before replacing the thermal fuse again try these steps. Step 1 unplug the clothes dryer s power cord from the wall outlet. If the motor won t run let the dryer cool for about ten minutes.

Then push the reset button. Many dryers are equipped with a reset button on the control panel. Touch each end of the fuses to the probes of a multimeter.

Clogged or restricted exhaust vent air flow is the most frequent cause of a thermal fuse blowing. The most common reason for replacing the blower. The procedure to reset the appliance by replacing the thermal fuse is straightforward and does not require the use of specialized equipment only a few household tools.

Remove the two screws from the bottom front panel using a phillips screwdriver. Check the lint screen for lint or a build up of debris that could be inhibiting air flow through the dryer. A blown fuse will have to be replaced.

If a reading near zero comes up the fuse is in fine condition. To test the fuses remove them from the metal connectors do not touch the wires.

Dryer Not Heating Check Dryer Thermal Fuse On Back